| Point & Click on any of
the following to learn more about ThermTech's wide line of
Standard or Custom designs.
|
We
design, engineer and manufacture Thermal and Catalytic Oxidizers with capacities ranging
from 100 SCFM to 30,000 SCFM. Our Thermal Oxidizers have a destructive efficiency of
99% +, operating temperatures to 2100°F and retention times as required to achieve
desired performance. We also offer Catalytic Oxidizers with destructive efficiency
that ranges from 90.00% to 99.99%. Heat exchangers are available to offer more
economical operating costs. We also offer optional designs for handling chlorinated,
fluorinated and other corrosive compounds. ThermTech has developed a unique
Enclosed Flare System for barge and tank loading facilities. This state of the art
design operates at approximately one third the operating costs of a typical flare system.
The capital cost is one half that of a conventional enriching flare system.
The ThermTech system uses diluting technology that is fully automated to offer the
ultimate in safety while automatically modulating fuel and air requirements as process
conditions change. The system is so economical, it is being used to replace existing
flare systems.
In addition to the above we offer Fixed Bed Concentrators/DeZorbers with
capacities up to 50,000 SCFM. The DeZorbers are designed for high flow processes
with low VOC concentrations. The PLC controlled desorb system combines adsorption
with oxidation technology to offer the lowest operating cost per CFM in the
industry. The fixed bed adsorbent removes the VOC's from the process stream.
The waste heat coming off the oxidizer is used to strip the VOC's from the adsorbent.
This VOC laden stream is then passed back through the oxidizer for VOC destruction.
These systems can be setup for manual operation or can be fully automatic depending
on the site requirements.
|
|